ELECTRO-VOICE RE520
Microphone à condensateur supercardioïde pour la scène et le studio
Stock : nous consulter
04060039011817
349,00 €
Présentation
- Spécialement conçus pour être les meilleurs rapports qualité/prix dans leur segment
- Nouvelle génération remplaçant le RE520
- Microphone à condensateur de haute qualité pour un grave chaud et défini, un médium naturel avec de la présence et un aigu aéré et cristallin- Le qualité studio sur scène
- Système de filtrage anti-pop à plusieurs épaisseurs pour minimiser les bruits de souffle et les plosives
- Filtre coupe-bas pour un contrôle de la réponse dans les basses fréquences
- Un corps en métal avec revêtement doux pour une prise en main agréable, Logo en métal et grille de protection de la capsule antichoc « Memraflex »
(traduction en attente)
The RE520 is a premium-grade, high-performance, condenser supercardioid vocal microphone. Designed to reveal the exceptional detail and vivid clarity synonymous with condenser elements, it elegantly delivers the lyrical finesse required for expressive vocal performances, while controlling off-axis sound from near-by sources.
The sonic signature is detailed, full and vivid, with a warm and clear low end, natural and present midrange, and an open, crisp and detailed high end. The supercardioid pattern provides excellent acoustic isolation. Maximum feedback rejection occurs when a stage monitor position is at either 225° or 125° off- axis to the element. This pattern also allows for a cleaner mix due to its rejection of off-axis sound.
The multi-stage pop filter consists of two layers of dense foam separated by air, which attenuates wind velocity caused by breath and windblasts.
The high-pass filter has two positions (see drawing). The flat position delivers the full frequency band pass of the capsule. The high-pass position attenuates frequencies below 150 Hz.
The internal shock mount isolates the microphone element from vibration and guards against handling noise.
The multi-stage pop filter consists of two layers of dense foam separated by air, which attenuates wind velocity caused by breath and windblasts.
The high-pass filter has two positions (see drawing). The flat position delivers the full frequency band pass of the capsule. The high-pass position attenuates frequencies below 150 Hz.
The internal shock mount isolates the microphone element from vibration and guards against handling noise.
Headlights
- Premium condenser element delivers a highly- detailed, full, and vivid sound
- Supercardioid polar pattern provides excellent acoustic isolation and feedback control
- Multi-stage pop filter minimizes breath blasts and plosives
- Selectable high-pass filter reduces undesirable low frequency content when engaged
- Vibration-absorbing internal shock mount minimizes handling noise
Caractéristiques
- Element type: Self-biased condenser
- Frequency response: 40 Hz-20 kHz (see chart)
- Polar pattern: Supercardioid
- Sensitivity, open circuit voltage, 1 kHz: 5.6 mV/Pascal (-45 dBV/Pa)
- Clipping (max SPL): 150 dB SPL (1% THD)
- Self noise: 17dB SPL "A" weighed (0 dB=20 μPa)
- Dynamic range: 133dB
- Signal-to-Noise ratio: 77dB
- Output impedance: 200 Ohms
- Power requirements: 48 VDC phantom power
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
- Microphone connector: 3-pin, XLR-type
- Finish: Black polyurethane paint
- Materials: Zinc die cast, steel wire cloth grille
- Dimensions, length: 7.6 in. (192 mm)
- Polar response:
- diameter: 1.95 in. (49.5 mm)
- shank: 0.96 in. (24.3 mm)
- Net weight: 11.5 oz (326 g)
- Shipping weight: 1 lb 4.9 oz (598 g)
| Résumé | Microphone à condensateur supercardioïde pour la scène et le studio |
|---|---|
| Garantie (Mois) | 24 |
| Connectique analogique | XLR 3 points |
Rédigez votre propre commentaire
